: Place the subwoofer on a flat surface. Mount the satellites on the included tripods and secure them with the locking knobs.
Run an XLR cable from "Mix Out" to the input of a second speaker. 2. Powering On Plug the IEC power cable into the speaker. Connect the plug to a grounded wall outlet. Turn the Master Volume knob to zero. Flip the power switch to the "On" position. 3. Gain Staging Play audio from your source at roughly 80% volume. Turn up the Channel volume until the audio is clear. Slowly raise the Master Volume to your desired room level. alien pro vector 15 manual
Proper gain staging and cable selection prevent unwanted distortion, clipping, and hardware damage. : Place the subwoofer on a flat surface