Default recommended for smooth motion: All jumpers installed under all drivers = 1/16 microstep.
If the problem persists, try the : Set your machine to its home position and type G28 to see if a specific axis movement triggers the reboot. This helps isolate the issue.
$21=1 , $5=1 (pull-up enable)
Default recommended for smooth motion: All jumpers installed under all drivers = 1/16 microstep.
If the problem persists, try the : Set your machine to its home position and type G28 to see if a specific axis movement triggers the reboot. This helps isolate the issue.
$21=1 , $5=1 (pull-up enable)