Manual — Ki 256 Installation

: A high-end system used in light twins and turboprops. 2. Technical Specifications & Panel Variants

is mandatory to prevent internal damage and ensure system precision. ki 256 installation manual

: Clock the time it takes the gyro horizon to erect fully and stabilize. It must become steady within 5 minutes of applying vacuum. : A high-end system used in light twins and turboprops

Engage the autopilot/flight director and verify that the command bars move in response to heading and altitude changes. : Clock the time it takes the gyro

Note: Always consult the specific KI 256 Maintenance Manual (e.g., P/N 006-0033-XX) for the exact pinout corresponding to your serial number. 4. System Testing and Post-Installation Checkout After installation, a full functional check is required.

Below is an overview of the technical requirements for integrating the KI 256 into an aircraft's avionics suite. 1. General Specifications

Connect the vacuum supply to the intake port on the rear of the chassis. Use a 1/4-inch flexible hose certified for aviation use. Secure the hose with a approved clamp to prevent pressure leaks. Electrical Wiring and Pin Configuration